FEATURES LIST:
During 2006, at the request of the International 3000GT/GTO/DSM Community we began developing a version of our market leading Hand Held Halo Datalogger Software to support what is commonly called the Hybrid ECU! These ECU’s output data using a standard 16-pin OBDII port but the communication protocol implemented by the ECU does not comply with any recognised OBDI or OBDII format.
Mitsubishi GTO MKII FAULT CODE DISPLAY
Perhaps the most immediate and informative feature is the Fault Code Reader which reads and clears Engine ECU Fault Codes (click image right). A full text description is provided alongside the fault code to allow you to easily cross reference with our user friendly Fault Code Reference Guide (a pdf chart included in the kit) as well the Manufacturers Service & Repair Manual (not included please ref. our website or other auctions).
Hand Held Halo Hybrid Datalogger Fault Code Display
NEW TO VERSION 2
USER DEFINABLE SENSORS:

Map up to 12x additional user definable sensors to increase your datalogging power and control! Compatible with aftermarket sensors that use the standard ECU parameters and 3rd party hardware loggers. (click image right)

Hand Held Halo Hybrid Datalogger Extra Sensors
With the increasing demands imposed by USA environmental legislation this OBDII variant was always intended to be an interim measure until Mitsubishi/Dodge implemented a fully compliant OBDII protocol by the US Government imposed deadline of 1996. To avoid implementing multiple OBD protocols on the same models, logic might have dictated that the OBDII implementation would be global of across the full range vehicles. Unfortunately this was not the case and by 1996 only the U.S 3000GT/Stealth and DSM’s were on the new protocol with the rest of the world still on the OBDII variant (Hybrid) until 1999.
NEW TO VERSION 2
NUMERIC DASHBOARD

Fully customisable numeric dashboard showing real-time values and peak high/low. Quick, intuitive and simple to use! Ideal for in-car PC's and Visor LCD's. (click image right)
NOW WITH!:
FULLY SKINNABLE DASHBOARD WITH USER DEFINABLE VISUAL AND AUDIBLE ALARMS
Hand Held Halo Hybrid Datalogger Numeric Dashboard
Mitsubish EVO IV 6 Unsurprisingly this is further complicated with variances from region to region but generally speaking the Hybrid ECU was commonly fitted to European and Japanese Mitsubishi 3000GT, GTO & EVO’s from 1994-1999 and USA 3000GT/Dodge Stealth & DSM’s from 1994-1996. Undoubtedly there will always be exceptions so please confirm your car is hybrid before ordering.

SELECT/GRAPH SENSORS
There are a number of ways to select and graph sensors all of them as easy as clicking a right mouse button (click image right). As the first to incorporate lightning fast real-time sample rates of over 70/second the graphs are smooth, accurate and superior to any other OBD program on the planet!

Hand Held Halo Hybrid Datalogger Sensor Selection
Hand Held Halo Datalogging have been active in the International Datalogging community for many years and have been responsible for some of the greatest OBDI datalogging innovation within that time e.g USB OBDI, Software Auto On/Off, Compare Sessions. The Hand Held Halo Hybrid OBDII Datalogger is yet another pioneering success, providing the performance tuner, import garage and vehicle enthusiast a like with the first truly effective and intuitive USB PC datalogging solution for this range of vehicles at a truly competitive price. Based on our highly regarded and well established Hand Held Halo Datalogger Software and USB Datalogging Cables this brand new Hybrid Solution is the Ultimate PC based diagnostic and performance monitoring system on the market.

RPM COUNTER
To support the accurate capturing of logged data we have included a bright clear rev counter (click image right). For example, you could start logging hold the revs in the green for 30 seconds, save the session and exchange, compare and contrast with other owners or a specialist import garage who's running our software.

Hand Held Halo Hybrid Datalogger Rev Counter

Mitsubishi GTO MKII

COMPARE SESSION FEATURE
Log your cars data, save it as a "session" and then exchange the "session" with
other owners on our forums or via email. They can then load your session into their copy of the Hand Held Halo Datalogger™ and time-shift the graphs to match a particular ECU parameter such as Engine Speed (click image right). All other displayed sensors will then show their values at this matched point to enable you to make an immediate and visible comparative analysis of your cars relative performance.

Hand Held Halo Hybrid Datalogger Compare Sessions
COMPATIBILITY: » 1994-99 Jap/Europe 3000GT/GTO
» 1994-95 USA 3000GT/VR4 or Stealth
» 1994-95 Talon, Eclipse or Laser (DSM)
» 1994-99 Mitsubishi EVO III->VI
» 1996-99 Mitsubishi Galant/VR4/Legnum
» 1997-99 Mitsubishi Colt/Mirage
» 1994-99 Mitsubishi FTO
USER DEFINABLE PROFILES
Sensor options such as graph colour and data refresh rate are easily definable using simple drop down menu's. This feature allows you to group sensors by colour and save your preferences as a "Profile" for future use (click image right).
Hand Held Halo Hybrid Datalogger Rev Counter
SYSTEM REQUIREMENTS: »  PC with a USB port
»  Windows 98/ME/2000/XP/Vista/Win7 (not x64)
»  CD-ROM - 2x Speed or higher
»  Processor - Pentium P166 or higher
»  System Memory - 64MB or greater
»  Hard Disk - 15MB Free Space
SENSOR MONITOR
Display all sensor values numerically or select and graph just the one's you're working on (click image right)!
Hand Held Halo Hybrid Datalogger Sensor Monitor
KIT CONTENTS:
» Our Brand New and unique Hybrid OBDII USB Datalogging Cable

» The Brand New Hand Held Halo Hybrid OBDII Datalogger™ Software

» A comprehensive PDF User Manual which includes an easy to follow Quickstart Tutorial, Fault Code Reference Guide and Glossary of commonly used Datalogging terms
What Do Our Customers Think?
"A very well put together and useful edition to the enthusiast or professional toolbox alike. The Hand Held Halo USB Data Logger unit was easy to install with limited ability, and gave clear concise information on all the engine parameters. With useful engine checks allowing the user to control many components for correct working operation. All in all an invaluable money saving tool."

Paul Wickham DCI Ltd Chelmsford Essex
(Review of the Hand Held Halo USB OBDI Datalogger™)
Hand Held Halo Datalogging Forum » Free software updates and significant discounts on future upgrades

» 12-month return to base product warranty (refer to the user manual for more details)

» Free unrestricted access and support through our new Hand Held Halo Datalogging Forum! (click image left)

* * * * *
THE FIRST PC SOLUTION FOR MITSUBISHI HYBRID VEHICLES AND STILL THE MOST POWERFUL AND COMPETITIVELY PRICED PRODUCT IN IT'S CLASS!
* * * * *

Hand Held Halo Hybrid OBDII Datalogging Kit

{SCAN TOOL FUNCTIONALITY AND MUCH MORE}:
* Display and clear the CHECK ENGINE error codes
* Sensor display
* Mass Air Flow Sensor
* Air Flow Temperature
* Throttle Position Sensor
* Engine Speed
* Injector Duty Cycle
* Battery Voltage
* Coolant Temperature
* Barometric Sensor
* O2 Sensor
* Idle Speed Control Position
* Turn On/Off actuators
* Injectors
* Fuel pump relay
* Knock Sensor
* Fuel Trims
* Air Fuel Ratio
* Vehicle Speed (as part of free update)
* Octane (as part of free update)

ONLY £99.99!
(10-day lead time)

© Hand Held Halo Productions. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.
HOME